Tripp Lite OmniVS UPS 1500VA 940W Tower 120V OMNIVS1500XL - Refurbished

Output Volt Amp Capacity (VA)

1500

Output kVA Capacity (kVA)

1.5

Output Watt Capacity (Watts)

940

Nominal Voltage Details

115v nominal output in battery mode

Frequency Compatibility

60 Hz

Output Voltage Regulation (Line Mode)

-18%, +8%

Output Voltage Regulation (Battery Mode)

+/- 5%

UPS Output Receptacles (Surge Suppression Only)

6 UPS outlets, 2 surge-only outlets

Hot-Swap PDU options

PDUB15 (2U / 8 5-15R outlets)

Output AC Waveform (AC Mode)

Sine wave

Output AC Waveform (Battery Mode)

PWM sine wave

Output Capacity Details

940W watts maximum when used with internal batteries or 1 BP24V15RT2U battery pack; Output is reduced to 600W maximum in all other external battery pack configurations

Nominal Output Voltage(s) Supported

110V; 115V; 120V

Output Receptacles

Individually Controllable Load Banks

No

Rated input current (Maximum Load)

12A

Nominal Input Voltage(s) Supported

120V AC

UPS Input Connection Type

UPS Input Cord Length (ft.)

6

UPS Input Cord Length (m)

1.8

Recommended Electrical Service

15A 120V

Input Phase

Single-Phase

Full Load Runtime (min.)

4 min. (940w)

Half Load Runtime (min.)

11.4 min. (470w)

Expandable Battery Runtime

Extended runtime supported via optional external battery packs

External Battery Pack Compatibility

BP24V15RT2U (limit 1); BP24V28-2U (limit 1); BP24V70-3U (multi-pack compatible)

DC System Voltage (VDC)

24

Battery Recharge Rate (Included Batteries)

Less than 4.5 hours from 10% to 90%

Internal UPS Replacement Battery Cartridge

RBC24-SLT

Battery Access

Battery access door

Battery Replacement Description

Hot-swappable, user replaceable batteries

Expandable Runtime

Yes

Voltage Regulation Description

Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 75 to 147

Overvoltage Correction

Input voltages between 128 and 147 are reduced by 12%

Undervoltage Correction

Input voltages between 93 and 107 are boosted by 14%

Severe Undervoltage Correction

Input voltages between 75 and 92 are boosted by 30%

Switches

2 Switches control off/on power status and alarm-cancel/self-test operation

Alarm Cancel Operation

Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate lowbattery status

Audible Alarm

Audible alarm indicates power-failure and low-battery conditions

LED Indicators

5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status

UPS AC Suppression Joule Rating

690

UPS AC Suppression Response Time

Instantaneous

UPS Dataline Suppression

1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet

EMI / RFI AC Noise Suppression

Yes

Cooling Method

Installation Form Factors Supported with Included Accessories

Tower

Installation Form Factors Supported with Optional Accessories

Wallmount (UPSWM - tower mounting kit)

Primary Form Factor

Tower

Primary UPS Depth (mm)

191

Primary UPS Height (mm)

300

Primary UPS Width (mm)

183

Shipping Dimensions (hwd / cm)

39.37 x 27.18 x 26.92

Shipping Dimensions (hwd / in.)

15.50 x 10.70 x 10.60

Shipping Weight (kg)

13.93

Shipping Weight (lbs.)

30.70

UPS Housing Material

Polycarbonate

UPS Power Module Dimensions (hwd, cm)

29.97 x 18.29 x 19.05

UPS Power Module Dimensions (hwd, in.)

11.8 x 7.2 x 7.5

UPS Power Module Weight (kg)

12.70

UPS Power Module Weight (lbs.)

28

Communications Interface

USB

PowerAlert Software

For local monitoring via the UPS’s built-in communication ports , download PowerAlert Local software at http://www.tripplite.com/poweralert

Communications Cable

USB cable included

WatchDog Compatibility

Supports Watchdog application, OS and hard-reboot restart options for remote applications