Description
Details
Manufacturer: Tripp Lite
Model: Tripp Lite SmartPro UPS 2200VA 1900W, RM, 4U, 120V
Condition: New batteries, refurbished UPS
Part Number: SMART2200CRMXL
Maximum output: 1900W / 2200VA
Typical backup time at half load:14.3 minutes (950 Watts)
Typical backup time at full load: 4 minutes (1900 Watts)
Warranty: 1 year full replacement warranty
Tripp Lite SmartPro 2200VA 1900W RM 120V SMART2200CRMXL Manual
SMART2200CRMXL - Tripp Lite SmartPro 2200VA Specifications:
Input:
|
Rated input current (Maximum Load) |
16A |
||
|
Nominal Input Voltage(s) Supported |
120V AC |
||
|
UPS Input Connection Type |
|
||
|
Input Circuit Breakers |
20A |
||
|
UPS Input Cord Length (ft.) |
10 |
||
|
UPS Input Cord Length (m) |
3.1 |
||
|
Recommended Electrical Service |
20A 120V |
||
|
Input Phase |
Single-Phase |
Output:
|
Output Volt Amp Capacity (VA) |
2200 |
||||
|
Output Capacity (kVA) |
2.20 |
||||
|
Output Watt Capacity (Watts) |
1900 |
||||
|
Output kW Capacity (kW) |
1.90 |
||||
|
Power Factor |
0.86 |
||||
|
Nominal Voltage Details |
120v nominal output in battery mode |
||||
|
Frequency Compatibility |
60 Hz |
||||
|
Output Voltage Regulation (Line Mode) |
-18%, +8% |
||||
|
Output Voltage Regulation (Battery Mode) |
+/- 5% |
||||
|
Load Management Receptacles |
Three switchable single-outlet 5-15R load banks |
||||
|
Output AC Waveform (AC Mode) |
Sine wave |
||||
|
Output AC Waveform (Battery Mode) |
Pure Sine wave |
||||
|
Nominal Output Voltage(s) Supported |
110V; 115V; 120V |
||||
|
Output Receptacles |
|
||||
|
Individually Controllable Load Banks |
Yes |
Battery:
|
Battery Type |
Valve Regulated Lead Acid (VRLA) |
|
Full Load Runtime (min.) |
11 min. (1900w) |
|
Half Load Runtime (min.) |
28 min. (950w) |
|
Expandable Battery Runtime |
Extended runtime supported via optional external battery packs |
|
External Battery Pack Compatibility |
BP48V24-2U (limit 1); BP48V48RT4U (multi-pack compatible); BP48V27- 2US (multi-pack compatible) |
|
DC System Voltage (VDC) |
48 |
|
Battery Recharge Rate (Included Batteries) |
Less than 3.6 hours from 10% to 90% (typical, full load discharge) |
|
Battery Access |
Front panel battery access door |
|
Internal UPS Replacement Battery Cartridge |
RBC94-2U (quantity 2) |
|
Battery Replacement Description |
Hot-swappable, user replaceable batteries |
|
Expandable Runtime |
Yes |
Voltage Regulation:
|
Voltage Regulation Description |
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145 |
|
Overvoltage Correction |
Input voltages between 127 and 145 are reduced by 12% |
|
Undervoltage Correction |
Input voltages between 92 and 107 are boosted by 14% |
|
Severe Undervoltage Correction |
Input voltages between 83 and 95 are boosted by 24% |
User Interface, Alerts & Controls:
|
Switches |
2 Switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches support low/high charger settings |
|
Alarm Cancel Operation |
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate lowbattery status |
|
Audible Alarm |
Audible alarm indicates power-failure, overload and low-battery conditions |
|
LED Indicators |
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status |
Surge / Noise Suppression:
|
UPS AC Suppression Joule Rating |
570 |
|
UPS AC Suppression Response Time |
Instantaneous |
|
EMI / RFI AC Noise Suppression |
Yes |
Physical:
|
Primary Form Factor |
Rackmount
|
|
Cooling Method |
Fan
|
|
Included Mounting Accessory Description |
Included 2POSTRMKITWM mounting accessory enables 2-post rackmount installation
|
|
Installation Form Factors Supported with Included Accessories |
2 post 19 inch rackmount
|
|
Installation Form Factors Supported with Optional Accessories |
4 post rackmount full-depth ( 4POSTRAILKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2- 9USTAND )
|
|
Minimum Required Rack Depth with External Battery Pack (cm) |
64
|
|
Minimum Required Rack Depth with External Battery Pack (in.) |
58
|
|
Minimum Required Rack Depth without External Battery Pack (in.) |
22.8
|
|
Optional Mounting Accessory Notes |
Optional 2-9USTAND enables upright tower UPS placement; 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches; 4POSTRAILKITWM enables installation in 4-post short-depth racks from 14.5 to 23.5 inches (368 to 597mm)
|
|
Primary UPS Depth (mm) |
452
|
|
Primary UPS Height (mm) |
175 |
|
Primary UPS Width (mm) |
439 |
|
Rack Height |
4U |
|
Shipping Dimensions (hwd / cm) |
35.56 x 58.42 x 59.69 |
|
Shipping Dimensions (hwd / in.) |
14.00 x 23.00 x 23.50 |
|
Shipping Weight (kg) |
56.25 |
|
Shipping Weight (lbs.) |
124.00 |
|
UPS Housing Material |
Steel |
|
UPS Power Module Dimensions (hwd, cm) |
17.50 x 43.94 x 45.21 |
|
UPS Power Module Dimensions (hwd, in.) |
6.89 x 17.30 x 17.80 |
|
UPS Power Module Weight (kg) |
45.50 |
|
UPS Power Module Weight (lbs.) |
100.3 |
Environmental:
|
Operating Temperature Range |
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
|
|
Storage Temperature Range |
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius |
|
Relative Humidity |
0 to 95%, non-condensing |
|
AC Mode BTU / Hr. (Full Load) |
242 |
|
Battery Mode BTU / Hr. (Full Load) |
885 |
|
AC Mode Efficiency Rating (100% Load) |
97% |
|
Audible Noise |
45 dBA maximum, front side 1m |
Communications:
|
Network Management Cards |
SNMPWEBCARD ; WEBCARDLX ; RELAYIOCARD |
|
Network Monitoring Port Description |
Supports detailed monitoring of UPS and site power conditions |
|
PowerAlert Software |
For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at https://www.tripplite.com/poweralert |
|
Communications Cable |
USB and DB9 cabling included |
|
WatchDog Compatibility |
Supports Watchdog application, OS and hard-reboot restart options for remote applications |
|
Network Management Card Description |
Network management card optional |
|
Communications Interface |
DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB (HID enabled) |
Additional Info
Additional Info
| Manufacturer | Tripp Lite |
|---|---|
| Form Factor | Rackmount |
| Waveform in Battery Mode | Pure Sinewave |
| Input Voltage | 120V AC |
| Output (VA) | 2200VA |
| Output Voltage | 120V AC |
| PDU Total Outlets | No |
