Description
Details
Love Manufacturer: Tripp Lite
Model: Tripp Lite SmartOnline UPS 10,000VA 9,000W, RM, 6U, 60A, 208V/240V, New Batteries, Refurbished UPS
Condition: New batteries, refurbished UPS
Part Number: SU10000RT3U
Maximum output: 9,000W / 10,00VA
Typical backup time at half load: 12.5 minutes (4500 Watts)
Typical backup time at full load: 4.3 minutes (9000 Watts)
Warranty: 1 year full replacement warranty
Tripp Lite SmartOnline 10000VA 9000W RM 6U 208V/240V SU10000RT3U User's Manual
SU10000RT3U - Tripp Lite SmartOnline 10000VA Specifications:
Output:
Output Volt Amp Capacity (VA) |
10000 |
||||
Output kVA Capacity (kVA) |
10 |
||||
Output Watt Capacity (Watts) |
9000 |
||||
Output kW Capacity (kW) |
9.0 |
||||
Power Factor |
0.9 |
||||
Crest Factor |
3:1 |
||||
Nominal Voltage Details |
Voltage selection via front panel LCD interface |
||||
Frequency Compatibility |
50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversion |
||||
Frequency Compatibility Details |
Output frequency matches input nominal on startup; Frequency conversion mode enables conversion of 60Hz to 50Hz or 50Hz to 60Hz (No de-rating); Output frequency regulation +/- 0.05Hz (free running) |
||||
Output Voltage Regulation (Line Mode) |
+/- 2% |
||||
Output Voltage Regulation (Economy Line Mode) |
+/- 10% |
||||
Output Voltage Regulation (Battery Mode) |
+/- 2% |
||||
Output Circuit Breakers |
20A double-pole (x2) protects 2 L6-20R outlets each, |
||||
Output AC Waveform (AC Mode) |
Pure Sine wave |
||||
Output AC Waveform (Battery Mode) |
Pure Sine wave |
||||
Output Capacity Details |
Supports up to 105% load continuously in double conversion mode, 106 to 125% for 1 minute, 126% to 150% for 30 seconds; Loads over 150% trigger immediate bypass mode operation to support loads directly from mains power; Double conversion mode is automatically restored as load levels are reduced to 95% or less |
||||
Nominal Output Voltage(s) Supported |
200V; 208V; 240V |
||||
Output Receptacles |
|
||||
Individually Controllable Load Banks |
No |
Input:
Rated input current (Maximum Load) |
56.1A (200V), 54A (208V), 51A (220V), 48.8A (230V), 46.8A (240V) |
||
Nominal Input Voltage(s) Supported |
200V AC; 208V AC; 240V AC |
||
UPS Input Connection Type |
|
||
UPS Input Connection Description |
3 wire single phase input (L1, L2, G) |
||
Recommended Electrical Service |
60A |
||
Input Phase |
Single-Phase |
Battery:
Full Load Runtime (min.) |
4.3 min. (9000w) |
Half Load Runtime (min.) |
12.5 min. (4500w) |
Expandable Battery Runtime |
Supports extended runtime with optional external battery packs |
External Battery Pack Compatibility |
BP240V10RT3U ; BP240V787C-1PH |
DC System Voltage (VDC) |
240 |
Battery Recharge Rate (Included Batteries) |
Less than 6 hours from 10% to 90% (typical, full load discharge) |
Battery Replacement Description |
Hot-swappable, user replaceable external battery packs |
Expandable Runtime |
Yes |
Voltage Regulation:
Voltage Regulation Description |
2% output voltage regulation in standard online, double-conversion mode |
Overvoltage Correction |
Corrects overvoltages up to 300V |
Undervoltage Correction |
Corrects undervoltages as low as 100V |
User Interface, Alerts & Controls:
Front Panel LCD Display |
Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options; LED/LCD panel rotates for viewing in rack/tower formats; LCD Display supports ENGLISH, FRENCH, GERMAN, ITALIAN, SPANISH and PORTUGUESE (see manual) |
Switches |
2 Switches control off/on power status and alarm-cancel/self-test operation; 2 additional switches support set and execute scrolling LCD functions; bundled PDU includes bypass switch to enable hot-swap UPS power module replacement |
Alarm Cancel Operation |
Alarm cancel switch |
Audible Alarm |
Unique audible alarms for all major UPS, environmental and power conditions (see manual) |
LED Indicators |
6 LEDs indicate line power, online mode, economy/bypass mode, on-battery, charger and AC output status; LCD screen offers additional information and control options |
Surge / Noise Suppression:
UPS AC Suppression Joule Rating |
2565 |
UPS AC Suppression Response Time |
Instantaneous |
EMI / RFI AC Noise Suppression |
Yes |
Physical:
Cooling Method |
Fan
|
Included Battery Pack Dimensions (hwd / in.) |
5.25 x 17.5 x 25
|
Included Battery Pack Weight (kg) |
71.99 |
Included Battery Pack Weight (lbs.) |
158.7 |
Included Mounting Accessory Description |
Not included |
Installation Form Factors Supported: |
4 post 19 inch rackmount |
Installation Form Factors Supported with Optional Accessories |
2 post rackmount ( 2POSTRMKITHD ) |
Maximum Device Depth (cm) |
82.55 |
Maximum Device Depth (in.) |
32.5 |
Maximum Device Depth (mm) |
826 |
Minimum Required Rack Depth (cm) |
95.25 |
Minimum Required Rack Depth (inches) |
37.5 |
Optional Mounting Accessory Notes |
2 sets of 2POSTRMKITHD required for 2 post rackmount installation of separate power module and battery pack |
Primary Form Factor |
Rackmount |
Primary UPS Depth (mm) |
656 |
Primary UPS Height (mm) |
131 |
Primary UPS Width (mm) |
445 |
Rack Height |
6U |
Shipping Dimensions (hwd / cm) |
78.74 x 66.04 x 104.14 |
Shipping Dimensions (hwd / in.) |
31.00 x 26.00 x 41.00 |
Shipping Weight (kg) |
136.08 |
Shipping Weight (lbs.) |
300.00 |
Unit Dimension Details |
Includes 3U UPS/power module, 3U external battery pack plus SUPDMB710 PDU with bypass; MAXIMUM DEVICE DEPTH specification refers to the whole UPS installed depth with bypass PDU installed |
UPS Housing Material |
Steel |
UPS Power Module Dimensions (hwd, cm) |
13.06 x 44.45 x 65.58 |
UPS Power Module Dimensions (hwd, in.) |
5.14 x 17.5 x 25.82 |
UPS Power Module Weight (kg) |
19.50 |
UPS Power Module Weight (lbs.) |
43 |
Environmental:
Operating Temperature Range |
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
|
Storage Temperature Range |
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius |
Relative Humidity |
0 to 95%, non-condensing |
AC Mode BTU / Hr. (Full Load) |
3415 |
AC Economy Mode BTU / Hr. (Full Load) |
1280 |
Battery Mode BTU / Hr. (Full Load) |
4593 |
AC Mode Efficiency Rating (100% Load) |
91% |
AC Economy Mode Efficiency Rating (100% Load) |
96% |
Operating Elevation (ft.) |
0-3000m (0 to 10,000 ft.) |
Audible Noise |
60 dBA at front side 1 meter |
Operating Elevation (m) |
0-3000 m |
Communications:
Network Management Cards |
SNMPWEBCARD ; TLNETCARD ; WEBCARDLX ; MODBUSCARD ; RELAYIOCARD |
Network Monitoring Port Description |
Additional contact closure support with optional RELAYIOCARD and RELAYIOMINI interface cards. RELAYIOMINI installation requires removal of panel containing USB ports |
PowerAlert Software |
For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert |
Communications Cable |
USB, DB9 serial and EPO cables included |
WatchDog Compatibility |
Supports Watchdog application, OS and hard-reboot restart options for remote applications |
Communications Interface |
USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface |
Additional Info
Additional Info
Manufacturer | Tripp Lite |
---|---|
Form Factor | Rackmount |
Waveform in Battery Mode | Pure Sinewave |
Input Voltage | 208V AC, 240V AC |
Output (VA) | 10000VA |
Output Voltage | 208V AC, 240V AC |
PDU Total Outlets | No |