Description
Details
Manufacturer: Tripp Lite
Model: Tripp Lite SmartOnline UPS 1500VA 1200W, RM, 2U, 15A, 120V
Condition: New batteries, refurbished UPS
Part Number: SU1500RTXL2U
Maximum output: 1200W / 1500VA
Typical backup time at half load: 17 minutes (600 Watts)
Typical backup time at full load: 5 minutes (1200 Watts)
Warranty: 1 year full replacement warranty
Tripp Lite SmartOnline 1500VA 1200W RM 120V SU1500RTXL2U Manual
SU1500RTXL2U - Tripp Lite SmartOnline Specifications:
Input:
UPS Input Cord Length (ft.) |
10 |
||
UPS Input Cord Length (m) |
3.1 |
||
UPS Input Connection Type |
|
||
Recommended Electrical Service |
15A 120V |
||
Maximum Input Amps |
12 |
||
Maximum Input Watts |
1395 |
||
Voltage Compatibility (VAC) |
120 |
Output:
Frequency Compatibility |
50 / 60 Hz |
||
Output Nominal Voltage |
120V AC |
||
Output Voltage Regulation |
Maintains full-time sine wave output within 2% of 120V, less than 5% total harmonic distortion |
||
Output Frequency Regulation |
Regulates line frequency to 50/60Hz +/- 0.05Hz |
||
Overload Protection |
Via input breaker |
||
Customized Load Management |
"2 individually controllable load banks support automated load shedding and remote reboot on demand of locked |
||
Output Receptacles |
|
Battery:
Runtime Full Load (min.) |
5 min. |
Runtime Half Load (min.) |
17 min. |
Expandable Runtime |
Yes |
Expandable Runtime Description |
Supports extended runtime with optional external battery pack BP48V212U (multi-pack compatible) |
DC System Voltage (VDC) |
48 |
Battery Access |
User replaceable, hot swap battery replacement supported via front access panel |
Battery Pack Accessory (Optional) |
BP48V212U (optional) |
Typical Battery Lifespan |
3-6 years, depending on usage |
Battery Charge |
2-4 hours to 90% |
Voltage Regulation:
Voltage Regulation Description |
On-line, double-conversion power conditioning maintains output within 2% of 120 volts at all times |
Overvoltage Correction |
Maintains output of 120V +/-2% without consuming battery power during overvoltages to 138V AC |
Brownout Correction |
Maintains output of 120V +/-2% during undervoltages to 80V AC |
Severe Brownout Correction |
At load levels less than 70%, UPS maintains output of 120V +/-2% during undervoltages to 65V AC |
User Interface, Alerts & Controls:
Front Panel LEDs |
6 LED STATUS DISPLAY: line power (green), online (green), bypass (yellow), on battery (green), overload (red), |
Switches |
Includes main power off/on switch, plus 1 switch to select battery charge / load level display |
Audible Alarm |
Multi-function audible alarm offers notification of UPS start, backup operation, low battery warning, overload, UPS |
Surge / Noise Suppression:
UPS AC Suppression Joule Rating |
2440 |
EMI / RFI AC Noise Suppression |
Yes |
AC Suppression Response Time |
Instantaneous |
Physical:
Material of Construction |
Steel
|
Cooling Method |
Built-in cooling fan
|
Form Factors Supported |
Supports 2U rackmount installation in 4 post rack enclosures. 2 post rackmount installation supported with optional
2POSTRMKIT. Upright tower installation supported with included tower stands |
Shipping Dimensions (hwd / in.) |
8.00 x 23.50 x 31.00
|
Shipping Dimensions (hwd / cm) |
20.32 x 59.69 x 78.74
|
Shipping Weight (lbs.) |
63.80
|
Shipping Weight (kg) |
28.94
|
Unit Dimensions (hwd / in.) |
3.500 x 17.500 x 22.000
|
Unit Dimensions (hwd / cm) |
8.89 x 44.5 x 52.8 |
Unit Weight (lbs.) |
49 |
Unit Weight (kg) |
22.23 |
Environmental:
Relative Humidity |
0 to 95%, non-condensing
|
Communications:
WatchDog Compatibility |
Yes, compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft |
Network Monitoring Port |
Built-in DB9 port offers both enhanced RS-232 enable monitoring data, plus contact closure monitoring ability |
EPO Port |
Supports "Emergency Power Off" via special-order cabling, contact Tripp Lite for more information |
SNMP Compatibility |
Yes, includes slot for optional SNMPWEBCARD accessory (#SNMPWEBCARD) |
Additional Info
Additional Info
Manufacturer | Tripp Lite |
---|---|
Form Factor | Rackmount |
Waveform in Battery Mode | Pure Sinewave |
Input Voltage | 120V AC |
Output (VA) | 1500VA |
Output Voltage | 120V AC |
PDU Total Outlets | No |