Description
Details
Manufacturer: Tripp Lite
Model: Tripp Lite SmartOnline UPS 5000VA 4500W, RM, 4U, 60A, 208V/240V, New Batteries, Refurbished UPS
Condition: New batteries, refurbished UPS
Part Number: SU5000RT4UHV
Maximum output: 4500W / 5000VA
Typical backup time at half load: 11 minutes (2250 Watts)
Typical backup time at full load: 3.5 minutes (4500 Watts)
Warranty: 1 year full replacement warranty
Tripp Lite SmartOnline 5000VA 4500W RM 4U 208V/240V SU5000RT4UHV Manual
SU5000RT4UHV - Tripp Lite SmartOnline 5000VA Specifications:
Input:
Rated input current (Maximum Load) |
24A (200V), 24A (208V), 23.6A (220V), 23A (230V), 21.7A (240V) |
||
Nominal Input Voltage(s) Supported |
200V AC; 208V AC; 240V AC |
||
Nominal Input Voltage Description |
Factory configured to 208V |
||
UPS Input Connection Type |
|
||
UPS Input Cord Length (ft.) |
10 |
||
UPS Input Cord Length (m) |
3.1 |
||
Recommended Electrical Service |
30A |
||
Input Phase |
Single-Phase |
Output:
Output Volt Amp Capacity (VA) |
5000 |
||||
Output kVA Capacity (kVA) |
5 |
||||
Output Watt Capacity (Watts) |
4500 |
||||
Output kW Capacity (kW) |
4.5 |
||||
Power Factor |
0.9 |
||||
Crest Factor |
3:1 |
||||
Nominal Voltage Details |
208V default |
||||
Frequency Compatibility |
50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversion |
||||
Frequency Compatibility Details |
Output frequency matches input nominal on startup; Frequency conversion mode enables conversion of 60Hz to |
||||
Output Voltage Regulation (Line Mode) |
+/- 2% |
||||
Output Voltage Regulation (Economy Line Mode) |
+/- 10% |
||||
Output Voltage Regulation (Battery Mode) |
+/- 2% |
||||
Output Circuit Breakers |
20A breaker protects L6-20R outlets, L6-30R outlets are unbreakered |
||||
Output AC Waveform (AC Mode) |
Pure Sine wave |
||||
Output AC Waveform (Battery Mode) |
Pure Sine wave |
||||
Output Capacity Details |
Supports up to 105% load continuously in double conversion mode, 106 to 125% for 1 minute, 126% to 150% for 30 seconds; Loads over 150% trigger immediate bypass mode operation to support loads directly from mains power; Double conversion mode is automatically restored as the overload is cleared |
||||
Nominal Output Voltage(s) Supported |
200V; 208V; 240V |
||||
Output Receptacles |
|
||||
Individually Controllable Load Banks |
No |
Battery:
Full Load Runtime (min.) |
3.5 minutes (4500 watts) |
Half Load Runtime (min.) |
11 minutes (2250 watts) |
Expandable Battery Runtime |
Supports extended runtime with optional external battery packs |
External Battery Pack Compatibility |
|
DC System Voltage (VDC) |
192 |
Battery Recharge Rate (Included Batteries) |
6 hours from 10% to 90% (typical, full load discharge) |
Internal UPS Replacement Battery |
RBC5-192 (qty 1) |
Battery Access |
Front panel battery access |
Battery Replacement Description |
Hot-swappable, user replaceable batteries |
Expandable Runtime |
Yes |
Voltage Regulation:
Voltage Regulation Description |
Online, double-conversion power conditioning |
Overvoltage Correction |
2% output voltage regulation during overvoltages to 280V (full load) / 300V (90% load or less) |
Undervoltage Correction |
2% output voltage regulation during undervoltages to 156V (full load) / 100V (50% load or less) |
User Interface, Alerts & Controls:
Front Panel LCD Display |
Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options; LED/LCD panel rotates for viewing in rack/tower formats (see manual) |
Switches |
2 Switches control off/on power status and alarm-cancel/self-test operation; 2 additional switches support set and execute scrolling LCD functions. |
Alarm Cancel Operation |
Alarm cancel switch |
Audible Alarm |
Unique audible alarms for all major UPS, environmental and power conditions (see manual) |
LED Indicators |
6 LEDs indicate line power, online mode, economy/bypass mode, on-battery, charger and AC output status; LCD screen offers additional information and control options |
Surge / Noise Suppression:
UPS AC Suppression Joule Rating |
2595 |
UPS AC Suppression Response Time |
Instantaneous |
EMI / RFI AC Noise Suppression |
Yes |
Physical:
Cooling Method |
Fan
|
Included Mounting Accessory Description |
4 post rackmount installation accessories included |
Minimum Required Rack Depth with External Battery Pack (cm) |
73 |
Minimum Required Rack Depth with |
28.67 |
Minimum Required Rack Depth |
65 |
Minimum Required Rack Depth |
25.67 |
Minimum Required Rack Depth (cm) |
95.25 |
Minimum Required Rack Depth (inches) |
37.5 |
Optional Mounting Accessory Notes |
2 sets of 2POSTRMKITHD required for 2 post rackmount installation of separate power module and battery pack |
Primary Form Factor |
Rackmount |
Primary UPS Depth (mm) |
525 |
Primary UPS Height (mm) |
174 |
Primary UPS Width (mm) |
445 |
Rack Height |
4U |
Shipping Dimensions (hwd / cm) |
30.48 x 60.96 x 73.66 |
Shipping Dimensions (hwd / in.) |
12.00 x 24.00 x 29.00 |
Shipping Weight (kg) |
68.95 |
Shipping Weight (lbs.) |
152.00 |
UPS Housing Material |
Steel |
UPS Power Module Dimensions (hwd, cm) |
17.40 x 44.45 x 52.50 |
UPS Power Module Dimensions (hwd, in.) |
6.85 x 17.5 x 20.67 |
UPS Power Module Weight (kg) |
51.53 |
UPS Power Module Weight (lbs.) |
113.6 |
Environmental:
Operating Temperature Range |
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
|
Storage Temperature Range |
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius |
Relative Humidity |
5% to 90% (non-condensing) |
AC Mode BTU / Hr. (Full Load) |
1767 |
AC Economy Mode BTU / Hr. (Full Load) |
640 |
Battery Mode BTU / Hr. (Full Load) |
1708 |
AC Mode Efficiency Rating (100% Load) |
90% |
AC Economy Mode Efficiency Rating (100% Load) |
96% |
Operating Elevation (ft.) |
0 to 6560 ft. / 0 to 2000 m |
Audible Noise |
65 dB at 1m front side |
Operating Elevation (m) |
0-2000 m |
Communications:
Network Management Cards |
SNMPWEBCARD ; TLNETCARD ; WEBCARDLX ; MODBUSCARD ; RELAYIOCARD |
Network Monitoring Port Description |
Two contact closure monitoring options available - RELAYIOCARD with six configurable contact closure outputs (uses UPS card slot) and RELAYIOMINI with 3 configurable contact closure outputs (requires removal of USB port module) |
PowerAlert Software |
For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert |
Communications Cable |
USB, DB9 serial and EPO cables included |
WatchDog Compatibility |
Yes |
Communications Interface |
DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB (HID enabled |
Additional Info
Additional Info
Manufacturer | Tripp Lite |
---|---|
Form Factor | Rackmount |
Waveform in Battery Mode | Pure Sinewave |
Input Voltage | 208V AC, 240V AC |
Output (VA) | 5000VA |
Output Voltage | 208V AC, 240V AC |
PDU Total Outlets | No |